Follow us!

FREE WORLDWIDE 3-7 SHIPPING🚚🌍

Get in touch with us

    Item has been added

    Subscribe arrow_drop_up

    Assembly instructions

    The Loving light™ lamp requires a very simple and basic mount so that any single person can mount it without having a minimum of skills!

    Below you will find a guide both in the form of a description and a video so that you can assemble it with a clear understanding of every single step of the process!

     

    1) Remove the piece of paper from the switch


    2) Cut the wire making sure there is a light at the beginning and end

    3) Wrap the piece of wire into the pillar

    4) Place the light and piece of wire at the top of the pillar

    5) Use hot glue straight from your kit to secure everything so nothing can escape

    6) put the hot glue in the lower part of the pillar and then insert it inside the box, making the lower part of the pillar stick to the lower part of the box and repeat this also with the upper part of the pillar

    7) Open the bag of snow and place it inside the box

    8) Next take some glue from the kit and put it in the frames on the outside of the box